Circuit Medic
Surface Mount Pad Repair – Quick Steps
Evaluate the damage and measure the pad length/width.
Select a replacement pad that matches the missing pad.
Cut out the replacement pad from the circuit frame.
Position the new pad using tape then bond in place.
Complete the connection to the existing conductor.
Land Repair – Quick Steps
Evaluate the damage and measure the land diameter.
Select a replacement land that matches the missing land.
Complete the connection to the existing conductor.
Position the new land using tape then bond in place.
Complete the connection to the existing conductor.
Gold Edge Contact Repair – Quick Steps
Evaluate the damage and measure the contact length/width.
Select a replacement contact that matches the missing contact.
Cut out the replacement contact from the Circuit Frame.
Position the new contact using tape then bond in place.
Complete the connection to the existing conductor.
Circuit Track Repair Quick Steps
Evaluate the damage and measure the conductor width.
Remove the damage, place the new Track and solder one end.
Form the Circuit Track to match the original conductor path.
Make any final bends and solder the remaining end.
Bond in place and overcoat with epoxy.
Plated Hole Repair – Quick Steps
Evaluate the damage and measure the diameter of the hole.
Select an eyelet with the proper dimensions.
Drill out the damaged hole using a ball mill.
Insert the eyelet and form using setting tools.
Completed plated hole repair.
Base Board Repair – Quick Steps
Evaluate the damaged base board.
Scrape away the damaged base board material.
Apply epoxy using a mixing pick.
Optionally apply epoxy with a foam swab.
Completed base board repair.