ITW EAE – Electrovert – Cleaner – Aquastorm 200
DRYER MODULE OPTIONS
DUAL DRYER (OPTION)
Two (2) thermocouple sensors temperature monitors with PC interface
Blower Drying Station #1
30 in. (76 cm) section
Two (2) ElectroAir adjustable upper airknives
One (1) ElectroAir fixed lower airknife
10 HP high velocity/high volume blower
Blower fail detect
Blower Drying Station #2
30 in. (76 cm) section
Two (2) ElectroAir adjustable upper airknives
One (1) ElectroAir fixed lower airknife
10 HP high velocity/high volume blower
Blower fail detect
TORRID ZONE (OPTION)
90.7 in. (230.9 cm) Total dryer section
Two (2) 6 in. (15 cm) exhaust stacks in lieu of second 12.17 in. exhaust stack
Temperature monitors
Three (3) via thermocouple sensors
Provides readout on computer interface
Final dryer module incorporates exit end enclosure
Exit end enclosure width: 474.5 mm (18.68 in.)
Sound dampening padding and storage compartment
Blower Drying Station #1
15 HP Direct Drive Blower
14.158 m3/min @101.6 cm H2O (500 scfm @ 40 in. H20)
Temperature up to 115° C (240° F)
Blower Drying Station 2 and 3
3 HP direct drive blowers
Two (2) 6kw heaters in each convection zone (total of four)
Variable output from 14.158 m3/min to 56.63 m3/min @ 7.62 cm. H2O
(500 to 2000 scfm @ 3 in. H2O)
Separate blower fail detect pressure sensors in each zone
Separate zone drying temperature up to 140° C (300° F)
CONVEYOR MODULE
20 in. (51 cm) width stainless steel mesh belt
Conveyor tensioning with safety clutch
Closed loop conveyor speed control via computer
1/8 HP 90 V. DC motor
Multidirectional chain drive with jam alert
30″ adjustable incline conveyor
16″ exit extension
Return conveyor under machine