Vanstron – PCB HANDLING EQUIPMENT – NG /OK unloader/ Dual lane magazine unloader
Product Introduction
Automatic NG/OK Unloader/ Dual magazine unloader – CE full regulation
Application:
Used after AOI. The OK and NG PCB after being tested by AOI can be separated and sent to the PCB racks.
Technical Specifications:
- Magazine capacity: top 2 + down 4, total 6 magazines
- Selectable pitch 10mm up to 80mm
- Auto/Manual run modes
- Diameter 3mm edge Flat ESD belt
- Component clearance: top 80mm bottom 20mm
- Power: AC220V/110V, 50/60 HZ, 1 phase
- Air Pressure: 5kgf/cm2
- PCB Convey Direction: L-R ( Or R-L)
- Front rail fixed ( or rear rail fixed)
- Conveyor height:900+-20mm
- Conveyor speed: 10m/s
Magazine max pcb width available at 250mm(S), 330mm(M), 390mm(L), 460mm(X)
| Model No | Description | Magazine Size | Max PCB Size |
| SUL250D | 250mm Magazine NG Unloader | 355x320x563 mm | 350×250 mm |
| SUL330D | 330mm Magazine NG Unloader | 460x400x563 mm | 460×330 mm |
| SUL390D | 390mm Magazine NG Unloader | 535x460x570 mm | 535×390 mm |
| SUL460D | 460mm Magazine NG Unloader | 535x530x570 mm | 535×460 mm |